Skip to content
FREE SHIPPING ON ALL ORDERS
FREE SHIPPING ON ALL ORDERS

15LW2400 18 Sound 15" 2400W 4" Woofer NEW

$392.50
BRAND NEW

15LW2400 18 Sound

15" 2400W 4" Woofer

  • The 15LW2400 has been developed as an evolution of the 15LW1401 low frequency transducer, setting a new industry standard in 15" (380 mm) ferrite high performance transducers. The speaker has been designed for use as a low bass or sub-woofer component in a compact cabinet (60 - 130 lt) reflex configuration, providing clean, linear, undistorted low frequency reproduction at very high power levels.
  • The high excursion capabilities of the Double Silicon Spider (DSS) enable the 15LW2400 to achieve high levels of linear travel and maintain full control of the moving mass. The fiberglass fiber reinforced, straight-sided ribbed cone assures smooth response with high internal damping. The 100 mm copper voice coil employs the Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. The weight of the windings are evenly distributed, providing a uniform motive drive.
  • The already low distortion and sound quality of 15LW2400 has been further improved by the Double Demodulation Rings (DDR) designed to dramatically reduce the intermodulation and harmonic distortion whilst improving the transient response. Excellent heat dissipation has been achieved by incorporating air channels between the basket and the top plate of the magnet. Further ventilation is provided using air vents in the back plate that direct air into the lower part of the voice coil gap. In order to furtherly increase power handling and reduce power compression figure, 15LW2400 uses the same voice coil ventilation technology developed for our flagship 9000 neodymium transducer series.
  • A low density material air diffractor is placed into the backplate acting as a cooling system, increasing power handling capability and lowering the power compression figure. As a final result the transducer shows 1 dB reduction in full power power compression value if compared to 15LW1401, and a program power handling value of 2400 Watt. 10% reduction in weight have been obtained optimizing the magnetic structure through advanced FEA CAD simulation tools.
  • The 15LW2400 ability to perform properly under inclement weather conditions has been achieved using an exclusive cellulose treatment which gives water repellent properties to both sides of the cone. In addition, an epoxy coating is applied to metal plates in order to resist against the corrosive effects of salts and oxidization.
  • Resonant frequency fS 40Hz
  • Electrical Q QES 0.32
  • Mechanical Q QMS 4.75
  • Total Q factor QTS 0.30
  • Suspension equivalent air volume VAS 131 litres
  • DC resistance RE 5.3 Ω
  • Voice coil inductance LE 1.25 mH
  • Force factor B·l 24 T·m
  • Suspension mechanical resistance RMS 7.3 N·s/m
  • Suspension mechanical compliance CMS 114 µm/N
  • Diaphragm material Straight ribbed, Fiberglass reinforced treated cellulose
  • Surround material Triple roll, Polycotton
  • Voice coil diameter 100 mm
  • Coil material Copper
  • Magnet Ferrite
  • 97 dB SPL 1W / 1m average sensitivity
  • 100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
  • 2400 W program power handling
  • Weather protected fiberglass reinforced cellulose cone
  • Double Silicon Spider (DSS) for improved excursion control and linearity
  • Unlimited life lead wire construction
  • Improved heat dissipation via multi-cell air diffractor and multiple backplate vents
  • Suitable for 60 to 130 liters low bass or subwoofer applications
FREE SHIPPING