BRAND NEW
10FCX64 B AND C
10" Professional Coaxial Speaker 70 x 70 8 Ohm
- The B&C 10FCX64 10" coaxial speaker's high-strength LF/HF motor, titanium diaphragm HF driver, and FEA-optimized design produce high output and minimal distortion.
- B&C's 10FCX64 10" coaxial loudspeaker produces generous amount of low-distortion output despite its compact form factor. The 10FCX64 offers resolution and accuracy that are suitable for professional "fill" loudspeakers, stage monitor wedges, studio monitors, or high-efficiency home audio systems.
- Power handling is 500 watts continuous program; combined with the driver's high efficiency, this results in very good maximum output. The 10FCX64's large-format HF compression driver permits an exceptionally low crossover point of 1,200 Hz, which offers a more consistent directivity transition from LF cone to HF horn.
- Coaxial HF driver with 2.5" voice coil, titanium diaphragm, and 70° X 70° coverage
- High-energy ferrite magnet shared by LF and HF components
- Woofer's copper-wound 2.5" voice coil ensures good power handling
- 1.2 kHz recommended crossover point
- Use with passive or active crossover (not included)
- Nominal Diameter10"Power Handling (RMS)250 Watts
- Power Handling (max) 500 Watts
- Impedance 8 ohms
- Frequency Response 65 to 18,000 Hz
- Sensitivity 95 dB 1W/1m
- Voice Coil Diameter 2.5"
- Resonant Frequency (Fs) 63 Hz
- DC Resistance (Re) 6 ohms
- Voice Coil Inductance (Le) 1.2 mH
- Mechanical Q (Qms) 7.9
- Electromagnetic Q (Qes) 0.44
- Total Q (Qts) 0.42
- Compliance Equivalent Volume (Vas) 0.89 ft.³
- BL Product (BL)13.4 Tm
- Diaphragm Mass Inc. Airload (Mms) 37g
- Maximum Linear Excursion (Xmax) 5.5 mm
- Surface Area of Cone (Sd) 320 cm²
- Cone Material Coated Paper
- Voice Coil Wire Material Copper
- Overall Outside Diameter 10.3"
- Baffle Cutout Diameter 8.8"
- Depth 5.7"
- Bolt Circle Diameter 9.6"
- Sealed Volume 0.258 ft.³
- Sealed F3 139.7 Hz
- Vented Volume 0.782 ft.³
- Vented F 361.13 Hz
FREE SHIPPING