iDATALINK MAESTRO ADS-MRR2 + HRN-RR-SU1 Interface Harness for 08-14 Subaru

Idatalink,ADS-MRR-2 Advanced Car Radio Replacement Interface

Advanced Radio Replacement Interface, Enabling Bluetooth Programming For Ios & Androids

Maestro RR2 adds built-in Bluetooth. Like the original RR, installers must flash the device, or download software to match

the car model. With the new Bluetooth version, the installer may flash the device wirelessly from a smartphone.

He no longer needs to be tethered to a computer.

Additionally, the new RR2 allows Kenwood radios to act as the readout screen for two ESCORT radar detectors:

the iX Ci custom-installed detector and the portable MAX Ci. Drivers can receive alerts and adjust radar settings through the car radio.

(The original RR works with K40 detectors).

The RR2 has three programmable outputs so it is able to link side cameras into the turn signals of new cars to add blind spot detection.

It can also trigger LED lighting so, a lightbar might be controlled by a steering wheel button.

RR2 has the ability to work with 2018 and newer vehicles with a gateway at the OBD2, including Chrysler, Dodge and Jeep vehicles.

The device is backwards compatible with earlier aftermarket radios that worked with the original RR and it will work with all existing T-harnesses.

iDatalink plus Subaru

Working in conjunction with the Maestro ADS-MRR module, iDatalink's HRN-RR-SU1 interface harness allows

you to connect a new iDatalink-ready car stereo in select 2008-14 Subaru vehicles. Once connected, you'll retain the

use of your steering wheel audio controls, your Subaru's amplifier and subwoofer (including the fader), and the factory

back-up camera in these vehicles. This installation harness will

not work with car stereos that do not feature an iDatalink serial port.

The package includes connectors that plug in between the Maestro module and your Subaru radio's

wiring plugs. You'll have to solder or splice together this harness's power/ground, illumination, speaker,

and navigation output wires to the corresponding wires on your aftermarket receiver's wiring harness.

With your iDatalink-ready car stereo, you'll be able to set up gauges on your receiver's screen to monitor

engine performance, tire pressure, and other functions. You'll also be able to read and reset the vehicle's Check Engine codes.

Product highlights:

allows installation of a new iDatalink-ready receiver in select Subaru models (also requires the Maestro ADS-MRR module)

only works with select Alpine, JVC, Kenwood and Pioneer receivers with iDatalink port

retains steering wheel audio controls

retains your Subaru's amplifier and subwoofer (including the fader)

displays engine gauges and Check Engine codes on touchscreen

warranty: 1 year

WHATS IN THE BOX:

Radio/vehicle harness

Sub harness

Backup camera harness

Jumper harness

Blue/white wire harness

OBDII harness

Vehicle Compatibility:

FOR Subaru

2009 - 2013 Forester (Base)

2011 - 2013 Forester (with factory Bluetooth)

2008 - 2011 Imprezza (Base)

2011 - 2011 Imprezza (with factory Bluetooth)

2008 - 2011 Imprezza WRX (Base)

2011 - 2011 Imprezza WRX (with factory Bluetooth)

2010 - 2014 Legacy (Base)

2012 - 2014 Legacy (with factory Bluetooth)

2010 - 2012 Legacy (with factory Navigation and Bluetooth)

2010 - 2012 Legacy (with factory Navigation, Bluetooth and Harmon Kardon audio system)

2010 - 2011 Legacy (with factory Bluetooth and Harmon Kardon audio system)

2010 - 2014 Outback (Base)

2012 - 2014 Outback (with factory Bluetooth)

2010 - 2012 Outback (with factory Navigation and Bluetooth)

2010 - 2012 Outback (with factory Navigation, Bluetooth and Harmon Kardon audio system)

2010 - 2011 Outback (with factory Bluetooth and Harmon Kardon audio system)

2012 - 2014 WRX (Base)

2012 - 2014 WRX (with factory Bluetooth)

2012 - 2014 WRX STi (Base)

2012 - 2014 WRX STi (with factory Bluetooth)