BRAND NEW
NTPC2132G Bello
52" Triple Play Flat Panel Mounting System
The Bell'O NTPC-2132G Triple Play gives you elegant storage for your A/V gear, with three different ways to set up your TV:
- Use the provided TV mount, attached to the rear fixed-height mounting frame — great for places where you'd rather not drill into your wall.
- Detach the provided mount and rear frame, and use the mount to hang your TV on the wall.
- Remove the mount and rear frame, and simply place your TV directly on the cabinet top.
The mount can support a TV with a screen size of up to 60" and weighing up to 125 lbs. The sturdy steel frame features a black scratch-resistant powder coating, with a gun metal front. Three tempered safety glass shelves can hold at least four audio/video components. And the shelves have angled sides so the cabinet can fit snugly into a corner. Interior channels in the frame hide cables, maintaining a clean, uncluttered appearance.
- Easy assembly — no tools required
Bell'O designed this cabinet for quick assembly without any tools. The frame is hinged, so all you have to do is open it up, then secure the built-in locks. The shelving and supports slip into place on sturdy pegs. Complete assembly takes just minutes.
- 3 TV mounting options for flat-panel TVs up to 60"
- TV sits directly on stand's top shelf
- TV attaches to included mount and fixed-height rear frame
- TV wall-mounts above stand using supplied mount
- 3 black tempered safety glass shelves (including top shelf)
- can hold at least 4 components
- steel frame with scratch-resistant high-gloss black powder coating and brushed nickel front
- top shelf: 52"W x 19-3/4"D
- weight capacity: 125 lbs.
- middle shelf: 41-1/2"W x 17-1/2"D
- height limit: 8-1/4"
- weight capacity: 50 lbs.
- bottom shelf: 41-1/2"W x 17-1/2"D
- height capacity: 8-1/4"
- weight capacity: 50 lbs.
- easy no-tools-required assembly
- cable management system
- 52"W x 56-1/2"H x 22"D (without mount)
What's in the box:
- Bell'O NTPC-2132G Triple Play owner's manual
- Frame assembly
- 3 Glass shelves
- Flat-panel support post
- Swivel bar
- 2 Mounting arms
- Wall-mount bracket
- 4 Shelf-pins
- 4 Glass pads
- U-Bracket
- 2 Hook-posts
- Bottom shelf support pin
- Four 15mm screws
- Two 65mm screw-knobs
- Two 30mm screw-knobs
- Two 27mm screw-knobs
- 4 Lab bolts
- 4 Drywall anchors
- Four 4mm x 15mm bolts
- Four 4mm x 30mm bolts
- Four 5mm x 15mm bolts
- Four 5mm x 30mm bolts
- Four 6mm x 15mm bolts
- Four 6mm x 35mm bolts
- Four 8mm x 20mm bolts
- Four 8mm x 40mm bolts
- 4 Short spacers
- 4 Long spacers
- Four M4/M5 washers
- Four M6/M8 washers
- Locking-clip
- Hey-key
- Assembly Instructions
FREE SHIPPING