Max Power 2000W Rated Input Power 4 ohms 500W x 1 2 ohms 1000W x 1
Specifications Signal to Noise Ratio: 100 dB1 Low Pass Filter: 50 - 200 Hz (-24 dB / oct.)1 Infrasonic Filter: 20 - 50 Hz (-24 dB / oct.)1 Bass Boost: 40 Hz (0 - +18 dB)1 Size(inch): (W)13-3/16" x (H)2-3/16" x (D)7-9/16"1 Weight(lbs): 6.2
Specs
Title
Class D Mono Power Amplifier
Amplifier Type
Class D
CEA-2006 Primary Ratings
Power Output
500Watts RMS x 1 at 4 Ohms and ≤1%THD+N
Signal-to-Noise Ratio
76dBA (Reference: 1Watt into 4Ohms)
Maximum Power Output
MAX POWER
2000W
Power Output
Rated Power at 14.4V
500Watts RMS x [ch] (4 Ohms, 20-200Hz, ≤1.0% THD) 1000Watts RMS x [ch] (2 Ohms, 100Hz, ≤1.0% THD)
Specifications
Signal to Noise Ratio
100dB (Reference: Rated Power into 4Ohms at 14.4V)
Frequency Response
20Hz-200Hz (+0dB, -3dB) Class D
Input Impedance
10k ohm
Speaker Impedance
4Ω (2Ω to 8Ω allowable)
Audio Section
Low-Pass Filter
Built in Variable Low-Pass Filter (50Hz-200Hz, -24dB/oct)
Infrasonic Filter
Built in Variable Infrasonic Filter (20Hz-50Hz, -24dB/oct)
Bass Boost
Built in Bass Boost Control (40Hz, 0dB-+18dB)
RCA Input Sensitivity
0.2[V] - 5.0 [V]
Speaker Level Input Sensitivity
4.0[V] - 12.0 [V]
Terminals
Battery & Ground
Screw Type Terminal Block (Ni) (M6)
Speaker Output
Screw Type Terminal Block (Ni) (M4)
Line In
RCA (Ni)
Line Out
RCA (Ni)
Speaker Input
JST Connector
General
Dimensions(WxHxD)
335 [mm] x 56 [mm] x 192 [mm] 13-3/16 inch x 2-3/16 inch x 7-9/16 inch
Weight (kg)
2.8 [kg] 6.2 [lbs]
Operating Voltage
14.4V（11-16V allowable） [V]
Current Consumption
65 [A]
Key Features
CEA-2006 Compliant Class D 2 Ohms Load Capability Speaker Level Input Signal Sensing Turn-on Terminal Cover Power MOS-FET Switching Power Supply Cast Aluminum Heat Sink Design Line Output Terminals for Extension
